Covidien INVOS 5100C, Operator'S Manual

Page: 137 / 178

Reviewing the Case in Database Operational Mode
Operator's Manual 8-19
The monitor will prompt to use the auto-set baselines. An alert will display with the message
“AUTO BASELINE(S) SET—PLEASE ACCEPT AUTO BASELINE(S) OR SET NEW BASELINE(S) WITH
CURRENT VALUES” in yellow (see
Figure 8-6. ). Perform the following navigation bar menu option:
Select ACCEPT AUTO BL. The baseline values set approximately 5 minutes after first rSO
2
data is
stored will appear in the data channel area.
8.7
Reviewing the Case in Database Operational Mode
Up to 24 hours of data may be stored per case file. When data storage exceeds 24 hours or mid-
night is reached, a new case file will be started.
Stored case data files can be viewed on screen (real-time review) or downloaded (case archive) in
the Database operational mode.
8.7.1
Real-Time Review of Database Information
At any time during a case, press the HOME key to display the Main screen, then select DATA-
BASE SUMMARY :.
From the Database summary menu, review information about induction time, baselines rSO2,
skin closure rSO2/time, AUC in [min%], and first alert [yes/no].
Real-Time Review in Database Operational Mode—Graphical Format

Note:
More than 1 hour of data must be stored to activate trend graph review. Data can only be reviewed in 1
hour increments.

Note:
Alarm messages, channel identification, and rSO
2
area elements will continue to be displayed while in real-
time review.
ACCEPT AUTO BL NEW BASELINES PREVIOUS MENU
BA EVENTS DATABASE SUMMARY ALARM AUDIO ON/OFF NEXT MENU