manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 83 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 83

4-11

Controls and Indicators

Heater Switch-Optional 

The optional heater switch operates the fan to deliver heat to the
cockpit. The switch is a four position switch; OFF, LOW, MEDIUM
and HIGH.

12-Volt Port 

This receptacle can be used to power and charge cellular phones,
MP3 players, video cameras or other electronics. These receptacles
are powered through a 10-amp fuse.

Ignition Keyswitch

This keyswitch starts and stops the engine. A built-in protection
system prevents the engine from starting in any gear other than
NEUTRAL. Refer to Shifter/Throttle in this section and consult
the engine operator’s manual for more information.

There is an accessory position on the ignition keyswitch and an
associated terminal on the back of the switch provided to control
power to add on accessories. Even though power to this terminal is
protected by a 20-amp fuse, do not connect any accessory that
draws more than 10 amps. Attaching an accessory to this terminal
should only be done by a qualified technician.

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 11

Summary of Contents for 100077





































































































































































































































Reviews:

No comments