manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 29 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 29

1-19

Boating Safety

If you are required to carry distress signals, you must have three
USCG approved pyrotechnic devices. Be sure they are in
serviceable condition, not exceeding the expiration date and
stored in a cool, dry location in a waterproof container. Have
enough signals on board to last three days.

ORANGE 
FLAG

RED DISTRESS FLARE
(HAND)

ORANGE SMOKE 
SIGNAL (HAND)

USE DAY AND NIGHT

O

S

S

 VISUAL DISTRESS SIGNALS

USE DAY AND NIGHT

USE NIGHT ONLY

DYE MARKER

USE DAY ONLY

ARMS SIGNALS
(USE BRIGHT CLOTH)

KC-0082

USE 
DAY 
ONLY

ELECTRIC 
DISTRESS
LIGHT

RED METEOR FLARE

USE DAY ONLY

USE DAY ONLY

Pyrotechnic signaling devices can cause

fire and / or explosion, death, serious injury and property
damage if improperly handled. Follow the
manufacturer’s directions.

!

D-Drive Sec 1_2010:Nautique Ski Sec 1.qxd  7/23/09  4:06 PM  Page 1-19

Summary of Contents for 100077





































































































































































































































Reviews:

No comments