manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 135 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 135

4-63

Troubleshooting

General Troubleshooting Guide

Display appears not to work or doesn’t come “ON”.

1. Display could be in 

sleep

mode. Touch a key on the keypad to

activate the display.

2. Check for loose connections at battery and display unit.
3. Check for reversed polarity on the power connections.
4. Verify battery has a minimum voltage of 6 Volts.

Display resets or goes “OFF” when starting engine.

1. Check display supply wires are connected properly to battery.
2. Verify battery is charged properly.
3. Check battery for efficient starter current.

Display has no backlight.

Contact your Nautique service center.

Display has no keypad backlight.

Contact your Nautique service center.

Controls and Indicators

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 63

Summary of Contents for 100077





































































































































































































































Reviews:

No comments