manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 199 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 199

8-17

Care and Maintenance

Tunable Rudder

The Tunable Rudder* is designed to
offer easy steering adjustment. This
system uses a composite tuning foil
which is located at the upper aft
corner of the rudder blade. Use a
Phillips head screwdriver to adjust
the foil. Loosen the two screws in the
relief slots of the tuning foil.

If the boat is pulling port 

(A)

, rotate the foil to port 

(B)

and tighten

screws. If the boat is pulling starboard 

(C)

, rotate the foil to

starboard 

(D)

and tighten screws. Always remember that movement

of the trailing edge of the foil to one side will cause the steering to
pull to the opposite side.

NOTICE

After each adjustment, test run and adjust again if necessary.

*Manufactured under license from National Products, Inc. U.S. patent 5,746,147.

CORC045

CORC162

B

D

A

C

D-Drive Sec 8_2010:Nautique Ski Sec 8.qxd  7/28/09  9:13 AM  Page 8-17

Summary of Contents for 100077





































































































































































































































Reviews:

No comments