CORRECT CRAFT 100077 Owner'S Manual Download Page 115

Page: 115 / 228

4-43

Controls and Indicators

TRACK INFO

– Tracking shows the current route and any

waypoints you have set. A green arrow indicates your current
position, while the red square indicates the initial point of
tracking.

Additional Soft Key Commands for Track Info include:

SAVE TRACK

– saves the current track information.

DELETE TRACK

– deletes the current track information.

WPT

– places a marker or ‘waypoint’ on the map to mark a

favorite location.

CURRENT POSITION

– used to return to the current

boat/satellite position after having moved the cursor to another
location.

COURSE UP

– determines how the orientation of the map is

displayed; either conventional “North Up”, or according to the
current course heading, “Course Up”.

EXIT TRACK INFO

– exits Track Info Popups back to the GPS

Popups.

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd 7/23/09 4:38 PM Page 43

Summary of Contents for 100077





































































































































































































































Search results

Summary of Contents for 100077

Reviews:

CORRECT CRAFT 100077, Owner'S Manual, Page: 115 / 228

Search results

Summary of Contents for 100077

Reviews: