manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 207 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 207

10-3

Winterizing Your Boat

Winter storage procedures vary depending on climate, type of
storage and length of storage. Check with your dealer/storage
facility manager for their advice on what works best in your climate.

When storing your boat up on a rack system, it is important the
racks adequately support the hull bottom.

If you do not have a trailer, support the boat like a Nautique dealer
recommended trailer. It is important to have an even weight
distribution.

If you do not have a dealer or marina nearby and must arrange
winter storage yourself, contact your regional warehouse.

If you use a mooring cover, DO NOT put it on when the interior of
the boat is wet and/or hot. It will trap moisture and lead to mildew
on the carpet and/or vinyl. Make sure your mooring cover allows
air to circulate, even if you have to leave a portion of the cover off.

CORC067

OFF

ON

RAW WATER
STRAINER

WATER
VALVE

Storage

D-Drive Sec 10_2010:Nautique Ski Sec 10.qxd  7/23/09  4:51 PM  Page 10-3

Summary of Contents for 100077





































































































































































































































Reviews:

No comments