manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 137 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 137

4-65

Controls and Indicators

Bow Features of Your 216 Nautique 

The open bow section of your boat has removable cushions. The
center section may be equipped with an optional filler cushion
which can be removed and stored in the trunk or under the
observer’s seat. Storage can be accessed by removing the other
cushions.

Correct Craft DOES NOT approve of any

structural changes, additions or modifications to our
products. Any time a dealer or consumer makes a
change to our product, they do so at their own risk and
sole liability. Correct Craft, Inc. will not be held liable for
unauthorized changes, whether deletions or additions,
to the original equipment / product manufactured and
sold by Correct Craft, Inc., even if such changes and
additions are made by an "authorized" Nautique dealer,
customer, promotional representative or any other
person, known or unknown to Correct Craft, Inc.

CAUTION

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 65

Summary of Contents for 100077





































































































































































































































Reviews:

No comments