manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 82 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 82

4-10

Section 4

The bilge switch must be turned on for this feature to operate. This
will not drain significant power from the battery unless the bilge
pump(s) is required to run frequently because of a leak or excessive
rainwater. This pumping system should not be relied on over an
extended period of time. Frequently inspect your boat for evidence
of excessive water in the bilge area. Consult your Nautique dealer if
you have any questions. 

NOTICE

Trash in bilge area can damage the bilge pumps. 

Horn 

The “HORN” button is a momentary switch. The horn will operate
whenever the button is pressed and will stop when the button is
released.

Check Engine Light 

This light will turn on when the ignition is turned (engine not
cranking); it will turn on for a few seconds, then turn off. The
Check Engine light will come on for all other engine-related
problems. This light will be off when the engine is running. Refer
to the engine manual for additional information.

Service Soon Light (Catanium Engine Only)

This light will turn on and stay on until either the engine is started
or the ignition is switched off. The Service Soon light will come on
if there is a problem with the catalyst system. This light will be off
when the engine is running.

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 10

Summary of Contents for 100077





































































































































































































































Reviews:

No comments