manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 109 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 109

4-37

Basic Navigation Features

All product features are easily accessed through Quick Access Keys,
Menus, and Popup Controls.  

Quick Access Keys

These keys provide one-button access to Gauge and GPS displays,
Clarion Audio and Cruise Gauge screens.  These features are also
accessible from the MENU.

MENU Key 

The Menu provides a list of available features, utilities, and
diagnostics.

Soft Key Commands 

A vertical control bar provides additional features and navigation
shortcuts corresponding to the current screen being displayed.
When available, additional Popup controls are accessed by 
pressing .

Soft Keys

The soft keys correspond to the Popup controls and activate
features accordingly when pressed.

ENTER Key

The Enter key advances to the next page of Popup controls. The
Enter key may also be used to confirm a SAVE when prompted
through a pop-up dialog box.  

Controls and Indicators

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 37

Summary of Contents for 100077





































































































































































































































Reviews:

No comments