manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 77 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 77

4-5

Controls and Indicators

Emergency Stop Switch

The emergency stop switch will stop the engine when the lanyard is
pulled far enough to disengage it from the switch. Attach the
lanyard to the boat operator whenever the engine is running but be
aware there will be a loss of engine power if the switch is activated.
If the operator is thrown from the seat, or moves too far from the
helm, the lanyard will become disconnected from the switch,
shutting off the engine. Refer to Section 1 for more information.

To attach a lanyard, connect the clip to the emergency stop switch
and the hook to a strong piece of clothing on the operator, such as
a belt loop.

NOTICE

The engine will not start unless the emergency stop switch is
attached.

LANYARD

HOOK

EMERGENCY STOP SWITCH

CLIP

CORC0224

DO NOT allow your boat to be operated

without the proper use of the emergency stop switch
and lanyard.

CAUTION

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 5

Summary of Contents for 100077





































































































































































































































Reviews:

No comments