manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 14 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 14

1-4

The Safety Alert Symbol means ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!

NOTICE

Indicates property damage message.

The precautions listed in this manual and on your Nautique boat
are not all-inclusive. If a procedure, method, tool or part is not
specifically recommended, you must satisfy yourself that it is safe for
you and others, and that the boat will not be damaged or made
unsafe as a result of your decision. REMEMBER - USE COMMON
SENSE WHEN OPERATING YOUR BOAT!

!

Section 1

Indicates a hazardous situation, which, if

not avoided, will result in death or serious injury. 

!

!

Indicates a hazardous situation, which, if

not avoided, could result in death or serious injury.

!

Indicates a potentially hazardous situation

that, if not avoided, could result in minor or moderate
injury or property damage. It may also be used to alert
against unsafe practices.

CAUTION

D-Drive Sec 1_2010:Nautique Ski Sec 1.qxd  7/23/09  4:06 PM  Page 1-4

Summary of Contents for 100077





































































































































































































































Reviews:

No comments