manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 73 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 73

4-1

Section 4

Controls and Indicators

Knowing the systems, controls and indicators on your boat is
essential for safe and proper operation.

Steering

The steering system in your Nautique boat provides excellent
maneuvering performance for pleasure boating or during
watersports.  Boat steering is not self-centering. Always keep a
secure grip on the steering wheel to maintain full boat control. The
steering wheel is equipped with a tilt lever to adjust the wheel angle
to a comfortable operating position when the boat is not moving.

RELEASE

LEVER

CORC133

Improperly maintained controls are

hazardous and may cause sudden loss of control. Make
sure all steering and shift / throttle hardware, cables and
fluid levels are regularly inspected and maintained.
Improper maintenance may result in a loss of control,
possibly causing serious injury or death.

!

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 1

Summary of Contents for 100077





































































































































































































































Reviews:

No comments