manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 76 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 76

4-4

Section 4

Shifter/Throttle

Your Nautique boat is equipped with a Shifter/Throttle Control
Handle which features a start-in-gear protection to prevent the boat
from moving when started.
A single-lever control with neutral warm-up button and safety lock-
out umbrella operates as both a gear shifter and a throttle control.
When the throttle lever is vertical, it is locked in the NEUTRAL
position for safety. Be sure the control is in NEUTRAL before
attempting to start the engine. Lifting the safety lock-out umbrella
and moving the throttle lever forward will engage FORWARD gear
in the transmission and increase the engine RPM. Moving the
throttle lever backward will engage REVERSE gear in the
transmission and also increase the engine RPM.

FORWARD SHIFT 
RANGE

REVERSE SHIFT RANGE

IDLE

IDLE

SAFETY LOCK-OUT
UMBRELLA

NEUTRAL

FORWARD
THROTTLE
RANGE

REVERSE
THROTTLE
RANGE

FULL 
THROTTLE

NEUTRAL
LOCKOUT

FULL 
THROTTLE

CORC0223

Hazard from replacing your shift/ throttle

control without a start-in-gear protection system can
cause death or serious injury, DO NOT replace the
control with a control that does not have this feature.

!

DO NOT shift too quickly from FORWARD to

REVERSE. Stay in NEUTRAL, or idle position until the
boat has lost most of its headway before completing the
shift to REVERSE or engine / transmission damage may
occur.

CAUTION

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 4

Summary of Contents for 100077





































































































































































































































Reviews:

No comments