manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 190 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 190

Section 8

8-8

Quick Oil Drain System

Change the engine oil after the first 25 hours of operation, then
after every 50 hours. The boat must be removed from the water to
use the quick oil drain system. There is a drain hose attached to the
bottom of the oil pan with a small plug screwed into the loose end
of the hose. 

Remove the bilge drain plug and put the end of the drain hose
through the bilge drain opening. Make sure there are no kinks or
sharp bends in the hose. The engine will drain most efficiently
when the oil is warm. Allow several minutes for the oil to settle and
drain. Dispose of used oil in an environmentally safe manner.

NOTICE 

Be sure the engine is off when you are draining your oil.

 

CORC169

Prolonged or repeated contact with used

engine oil can cause death or serious injury. Wash
affected area immediately with soap and water.

!

D-Drive Sec 8_2010:Nautique Ski Sec 8.qxd  7/28/09  9:13 AM  Page 8-8

Summary of Contents for 100077





































































































































































































































Reviews:

No comments