manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 5 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 5

v

Boating Terminology

* An easy way to remember PORT side from STARBOARD side is
“PORT” and “LEFT” both have four letters.

Product Improvement

Because of our policy of continuous product improvement, the
illustrations used in this manual may not look the same as on your
boat and are intended only as representative reference views. Some
illustrations may also show optional accessories which may or may
not be available for your boat. Many optional accessories can only
be installed at the time the boat is manufactured and cannot be
installed by your dealer. Your dealer will be happy to provide details
on installing accessories.

CORC001

BOW

DRAFT

FREEBOARD

GUNWALE

STERN

WATERLINE

AFT

FORWARD

HELM

BEAM

TRANSOM

LENGTH OVERALL (LOA)

STARBOARD

SIDE

PORT

SIDE

D-Drive front matter_2010:Nautique Ski front matter.qxd  7/28/09  9:15 AM  Page v

Summary of Contents for 100077





































































































































































































































Reviews:

No comments