CORRECT CRAFT 100077 Owner'S Manual Download Page 124

Page: 124 / 228

4-52

•

Cruise Settings

– facilitates creation and maintenance of

rider/skier profiles for cruise controls based on user
preference for speed. This feature is covered in the Quick
Key Access section.

•

Engine Diagnostics

– displays a list of engine fault codes and

descriptions; on some engines, corrective action will be
shown.

•

User Settings

– allows you to customize the display options

for ambient light and brightness, set US or metric units,
specify the Home screen and screen setup status.

•

Utilities

– allows configuration of the unit including wire

configuration, plug address, fault conversion, CAN data, and
fault codes. Also displays software version information at the
top of the page.

•

GPS Utilities

– contains options to set up track and position,

chart and time and waypoint manager. Also displays satellite
status.

Section 4

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd 7/23/09 4:38 PM Page 52

Summary of Contents for 100077





































































































































































































































Search results

Summary of Contents for 100077

Reviews:

CORRECT CRAFT 100077, Owner'S Manual, Page: 124 / 228

Search results

Summary of Contents for 100077

Reviews: