manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 144 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 144

4-72

Section 4

Floor Cooler(s) 

The floor cooler(s) can be used to store miscellaneous items or
drinks. There is a drain installed in the cooler(s). DO NOT depend
on the cooler(s) to keep valuables or electronics dry. Keep these
items in a specialized dry bag. The floor cooler has a removable
tray. DO NOT use abrasive cleaners or place in a dishwasher. Use a
mild biodegradable soap only.

Boarding Platform

The boarding platform of your boat is a convenient feature to
enhance the watersports experience. There are serious safety
concerns regarding the use of the platform. Correct Craft, Inc. has
placed warning labels at the driver’s position, on the deck at the
rear of the occupant area and on the transom. Refer to Section 1,
Safety, for more information.

To remove the boarding platform, pull the pins 

(A)

located in the

mounting brackets, under the platform, and lift the platform
vertically. 

200 Only

A

CORC226

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  8/4/09  1:09 PM  Page 72

Summary of Contents for 100077





































































































































































































































Reviews:

No comments