manualshive.com logo in svg

CORRECT CRAFT 100077, Owner'S Manual, Page: 3 / 228

Share
Download
CORRECT CRAFT 100077 Owner'S Manual Download Page 3

iii

Boater’s Checklist

For improved safety and enjoyment, check each of these items:

Check Before You Launch Your Boat:

• Read both the engine and the boat operator manuals.
• Drain plug (Securely in place?)
• Propeller Condition (Prop nut tight and secured, no cracked

or bent blades, prop turns freely?)

• Steering System (Working smoothly and properly, self 

locking nuts in place?)

• Battery (Fully charged, cable terminals clean and tight?)
• Capacity Plate (Are you overloaded?)
• Weather conditions (Safe to go out?)
• Fuel and Oil (Sufficient for trip, check bilge area for gas 

odor, no leaks?)

• Hoses and Connectors (No leaks or damage?)
• Electrical Equipment (Lights, horn, pumps, etc.?)
• Safety Equipment (Fire extinguisher, bailer, paddle, anchor 

and line, mooring lines, signaling device, tool kit, first aid 
kit, first aid manual?)

• Personal Flotation Devices for all occupants
• Float Plan submitted to Responsible Person (Verbal or 

written?)

Check Before You Start Your Engine:

• Fuel (Sufficient for trip, check bilge area for gas odor?)
• Control Lever in Neutral
• Capacity Plate (Are you overloaded?)
• Personal Flotation Devices for all occupants
• Seating (Everyone in proper place?)
• Engine Stop Switch and Lanyard (Operational and securely 

fastened?)

• No one in water near boat
• Keep firm and continuous grip on steering wheel
• Engine Cooling Water Valve open

D-Drive front matter_2010:Nautique Ski front matter.qxd  7/28/09  9:15 AM  Page iii

Summary of Contents for 100077





































































































































































































































Reviews:

No comments