![background image](http://html.mh-extra.com/html/conair/ch-series/ch-series_installation-manual_2649431038.webp)
2-20
I
Hopper Installation Guide
Location and Mounting of the Vacuum
Pump(s)
(optional)
The optional vacuum pump(s) and associated dust collector(s) supplied with the
Drying System are designed to be mounted to the floor and in any convenient location
near the drying hopper.
1
Using a forklift, hoist or crane, move the vacuum pump(s) and associated dust
collector(s) to its installation location.
CAUTION:
To prevent accident and injury, move the dust collector to its
mounting location using a forklift, hoist or crane.
2
Position the equipment so that the main power supply, communication cables
and conveying lines can be connected easily.
IMPORTANT:
You will need to consider the location of all your Drying System
components to properly install the vacuum pump(s) and associated dust collector(s).
3
Secure the vacuum pump(s) and associated dust collector(s) to their mounting
locations on the floor by using the holes in the base of each component.
Ensure that the mounting method meets all local, regional and national codes
and regulations.