![background image](http://html.mh-extra.com/html/conair/ch-series/ch-series_installation-manual_2649431026.webp)
2-8
I
Hopper Installation Guide
Installing the Cyclone Dust Collector
(optional) (continued)
9
Remove 5/16-inch - 18-inch hardware
from the opening
on the top of the hopper.
10
Loosen the hose
clamps and adjust the
connecting elbow as
required
inorder to
mount the elbow to the
top of the hopper.
11
Reinstall all necessary harware to secure the elbow.
12
Tighten all bolts within the cyclone
and tubing assemblies with an
appropriately-sized wrench.
13
Mount the cyclone fines container on
the leg of the hopper stand ensuring
it is inline with the cyclone.
Use the
supplied hardware to secure and fasten
the container as shown in the picture.
14
Connect the supplied hose from the cyclone outlet into the fines container.
Make sure all hoses are securely clamped to prevent wasteful leaking. The hoses
should be routed neatly and supported where possible to prevent undue stress on
cyclone assembly.
15
Install, fasten
and tighten
hose clamps
to firmly secure
hose installation.
NOTE:
Do not allow the
flexible hoses to kink
or crimp.