Hopper Installation Guide
I
2-7
5
Adjust the cyclone mounting bracket to match
the above measured distance.
6
Remove the three (3) bolts located on the hopper
lid section and three (3) in-line bolts in the next
flange
within the upper ection or hopper door section of the hopper.
7
Using a forklift,
hoist or crane,
raise the cyclone
assembly to its
installation
location
on the
bracket mounted to
the hopper.
8
Mount the cyclone
assembly to the
upper section using
supplied hardware.
Installing the Cyclone Dust Collector
(optional) (continued)
To adjust the cyclone mounting bracket:
•
Simply remove the 1/2-inch - 1/3-inch
hardware.
•
Adjust the position of the mounting bracket.
•
Then reinstall the removed hardware.
(Continued)
CAUTION:
To
prevent accident and
injury, move the cyclone
separator to its mount-
ing location using a
forklift, hoist or crane.