![background image](http://html.mh-extra.com/html/conair/ch-series/ch-series_installation-manual_2649431009.webp)
Hopper Installation Guide
I
1-5
Installation of the HTC Control
(Models HTC 30, 60, and 90)
CAUTION:
You are responsible for the structural integrity of this installation.
NOTE:
The HTC control is shipped mounted on the left side of the Hopper floor stand on models
30, 60 and 90.
NOTE:
If, by using your own provisions, you change the mounting arrangement of the control center to
a wall mount unit, it must be mounted six (6) inches {152.4 mm} off of the wall to provide clearance for
the heat sink.
HTC Control
Center
NOTE:
If using a GasTrac for
the drying system heat source,
see
“Installing the Hopper
Cone Section”
(Continued)