![background image](http://html.mh-extra.com/html/conair/ch-series/ch-series_installation-manual_2649431030.webp)
H P H e a t e r P a c k I n s t a l l a t i o n
( c o n t i n u e d )
54-inch hopper and larger - Mounting
Heater Pack Directly to
Hopper Using Tabs
Extending from Door
Section
1
Mount Heater Pack to hopper.
Use supplied hardware, 1/2-13
bolts and nuts. The Heater Pack
should mount directly to the cir-
cled tabs. See Figures 8 and 9.
2
Adjust the Heater
Pack bracket and
upper elbow
bracket
as needed
to align the bottom
elbow with the
hopper inlet. See
Figures 10 and 11.
3
Pull back on the
insulation on the
outlet tube of the
Heater Pack.
4
Place the supplied gasket between the outlet tube
flange and the flange of the inlet tube on the hopper.
Attach the tubes together with supplied 5/16-18 bolts
and nuts. See Figure 12.
To order parts, Conair’s
Instant Access 24/7 Parts
and Service number is
800-458-1960.
Outside the U.S., dial
814-437-6861.
Figure 8
Figure 9
Figure 11
Figure 12
Figure 10
2-12
I
Hopper Installation Guide
(Continued)