![background image](http://html.mh-extra.com/html/conair/ch-series/ch-series_installation-manual_2649431022.webp)
2-4
I
Hopper Installation Guide
Ladder and Handrail Installation
(continued)
Ladder Installation
After installing the handrail using one of the two handrail
installtion methods mentioned in the previous section,
begin to install the ladder.
1
Locate and gather all ladder assembly including
ladder/stand and brackets.
2
Ladder/Handrail brackets and hardware includes:
• Six (6) 3/8-16 inch x 1 inch
• Twelve (12) 3/8-16 inch x 1 1/4 inch
• Eighteen (18) 3/8-16 inch nuts
3
Mount handrail brackets on the ladder with
3/8-16 inch x 1 1/4 inch bolts.
Leave slightly
loose to allow brackets to move for correct
positioning and installation to the handrail.
4
Mount ladder/stand brackets onto the
ladder using four (4) 3/8-16 inch x 1 inch bolts.
Leave slightly loose for correct positioning
and installation.
5
Using a forklift, hoist, or crane, lift the ladder into place.
Connect ladder/handrail brackets previously assembled onto
the ladder using the supplied hardware (3/8-16 inch x 1 inch bolts).
6
Adjust and tighten all loose hardware.
7
Mark location of the ladder/stand brackets on the stand.
Drill clearance hole for bolts using x (.3970) drill bit.
8
Install the ladder/stand using the provided hardware
(3/8-16 inch x 1 1/4 inch bolts, 3/8-16 inch nuts).
9
Secure and tighten all hardware.
Tools for installation
U
Forklift, hoist, or crane;
and
U
Other tools as dictated
by the specific installation.
CAUTION:
To
prevent accident and
injury, lift the ladder
onto the upper section
of the hopper using a
forklift, hoist, or crane.
3
4