![background image](http://html.mh-extra.com/html/conair/ch-series/ch-series_installation-manual_2649431037.webp)
Hopper Installation Guide
I
2-19
Location and Mounting of the Dust
Collector
(optional)
The optional dust collector that is used with your Dryer System is designed to be
mounted to the floor near the drying hopper and optional integrated cyclone.
To install the optional dust collector:
1
Using a forklift, hoist or crane, move the dust collector to its installation
location
near the hopper and optional integrated cyclone.
IMPORTANT:
You will need to consider the installation of your entire dryer
system before permanently placing any system component.
CAUTION:
To prevent accident and injury, move the dust collector to its
mounting location using a forklift, hoist or crane.
2
Secure the dust collector to the mounting location
on the floor by using the holes in the legs of the
dust collector.
Ensure that the mounting method
meets all local, regional and national codes
and regulations.
3
Ensure that the hoses from the differential pressure
transmitter, mounted to the dust collector leg, have
not become detached
from the dust collector’s inlet
and outlet tubes during installation.
Inlet
Outlet
Pressure
Differential
Transmitter
NOTE:
Dust collector shown with
straight legs. Your dryer system will
be supplied with dust collectors with
“kick-out” legs.