H P H e a t e r P a c k I n s t a l l a t i o n
( c o n t i n u e d )
33-inch Hopper
1
Attach the Heater Pack to the hopper using
bolts shown
. The top mounting flange will rest
on the top of the hopper lid. See Figures 13, 14,
and 15.
2
Run a hose clamp through the slot in the
Heater Pack bracket that rests on the hopper
inlet, and tighten it around the inlet tube
. The
elbow will attach with flexible ducting. See
Figures 14 and 15.
3
Adjust the Heater Pack height on the bracket
as needed.
See Figures 16 and 17.
4
Make any necessary adjustments between the
hose connections the heater tubes and mani-
folds.
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Hopper Installation Guide
I
2
-
13