4-20
Compaq Deskpro Workstation AP250 Maintenance and Service Guide
Compaq Confidential – Need to Know Required
Writer: Bruce Sullivan Project: Compaq Deskpro Workstation AP250 Maintenance and Service Guide Comments:
Part Number: 118133-001 File Name: e-ch4 Diagnostic Tools.doc Last Saved On: 10/26/99 3:09 PM
Memory Problems
Table 4-9
Memory Problems
Problem
Possible Solution
Out of memory error.
Run Performance Monitor. Click
Start,
Programs, Administrative Tools.
The workstation has run out of memory to
run the application. Check the application
documentation to determine memory
requirements.
Memory count during POST is wrong.
The Direct RIMMs may not be installed
correctly. Verify that the Direct RIMMs have
been installed correctly in the RIMM
sockets then run the Computer Setup
utility.
Insufficient memory error during operation.
The system has run out of memory for the
application. Check memory requirements
for the application or install additional
memory.
SCSI Problems
Table 4-10
SCSI Problems
Problem
Cause
Solution
System will not boot from a
SCSI drive.
The SCSI drive is not
configured correctly.
Be sure that the drive
cabling and jumpers are
set correctly. To boot a
SCSI drive, the drive ID
number must be set to 0.
