3-34
Compaq Deskpro Workstation AP250 Maintenance and Service Guide
Compaq Confidential – Need to Know Required
Writer: Bruce Sullivan Project: Compaq Deskpro Workstation AP250 Maintenance and Service Guide Comments:
Part Number: 118133-001 File Name: d-ch3 Removal and Replacement Procedures.doc Last Saved On: 10/26/99 3:02 PM
4.
Remove the four screws that secure the speaker to the side of the
chassis
1
, then remove the speaker
2
.
2
1
Figure 3-29. Removing the speaker
To reinstall the speaker, reverse the above procedure.
Removing the Power Supply
To remove the power supply:
1.
Perform the steps in the “Service Preparations” section.
CAUTION:
Before removing the side access panel, ensure that the workstation
is turned off, all cables are disconnected from the back of the workstation, and
the power cord is disconnected from the grounded AC outlet.
2.
Remove the side access panel.
3.
Disconnect all power cables from the mass storage devices and the
system board.
