Index 5
Compaq Confidential – Need to Know Required
Writer: Bruce Sullivan Project: Compaq Deskpro Workstation Maintenance AP250 and Service Guide Comments:
Part Number: 118133-001 File Name: x-index.doc Last Saved On: 10/4/99 10:09 AM
extended warranty 2-4
external SCSI connector 8-2
F
FailSafe Boot Block ROM 4-49
figures
Figure 1-1. Exploded view of
the Compaq Deskpro
Workstation AP250
mechanical parts 1-2
Figure 1-2. Exploded view of
the Compaq Deskpro
Workstation AP250
mechanical parts 1-3
Figure 3-1. Identifying serial
number locations 3-2
Figure 3-10. Removing a 3.5-
inch hard drive 3-12
Figure 3-11. Releasing the
hard drive with the
drivelock 3-13
Figure 3-12. Removing a 3.5-
inch drive from a 5.25-inch
drive bay 3-14
Figure 3-13. Removing a 3.5-
inch hard drive from the
5.25-inch drive
adapter 3-15
Figure 3-14. Disconnecting the
cables from the CD-ROM
drive 3-16
Figure 3-15. Releasing the
CD-ROM drive with the
drivelock 3-17
Figure 3-16. Removing a CD-
ROM drive from a 5.25-
inch drive bay 3-18
Figure 3-17. Identifying SCSI
cable with terminator 3-20
Figure 3-18. Removing the
Drivelock 3-22
Figure 3-19. Reinstalling the
drivelock 3-23
Figure 3-2. Removing the
padlock 3-3
Figure 3-20. View of the
expansion slots 3-24
Figure 3-21. Removing an
expansion board 3-25
Figure 3-22. Removing the
Card Guide 3-26
Figure 3-23. RIMM slots 1 &
2 3-28
Figure 3-24. Removing a
RIMM memory
module 3-29
Figure 3-25. Removing the
processor from the system
board 3-30
Figure 3-26. Removing the
metal bracket from the back
of the processor 3-31
Figure 3-27. Removing the
733-MHz processor from
the heatsink 3-32
Figure 3-28. Removing the
processor guide rails from
the system board 3-33
Figure 3-29. Removing the
speaker 3-34
Figure 3-3. Removing the side
access panel 3-4
Figure 3-30. Removing the
Power Supply 3-35
Figure 3-31. Disconnecting
and removing the power
switch and switch
holder 3-36
Figure 3-32. Removing the
system board 3-38
Figure 3-33. Removing the I/O
panel 3-39
Figure 3-34. Locating the
battery on the system
board 3-40
Figure 3-35. Removing the
battery 3-41
Figure 3-36. Releasing the
drives with the
drivelock 3-42
