Control Station Duetto
WebConfig configuration
1.7/1217
63
Additional action settings
Click on the button
DELETE ALL
to delete all rules irreversibly.
Click on the button
APPLY
to save the settings.
Import/export rules
To import or export logic rules, follow the instruction below:
Click on the button
IMPORT | EXPORT
. The following dialogue appears:
Export logic rules
: Click on the button
EXPORT
to save the logic rules as a BLF file on the connect-
ed computer.
Import logic rules
: Click on the button
Browse
, select the desired BLF file and click on the button
IMPORT
. The following dialogue appears:
Select the desired mode for the import
Select one of the following radio buttons:
Replace currently configured logic rules with imported rules
: At import, all logic rules
saved on the device will automatically be replaced by the logic rules saved in the imported BLF
file.
Keep both
: All full screens and keypad sidebars on the device will remain.
Click on the button
IMPORT
.
%EVENTVALUE%
The string “%EVENTVALUE%” (without quotation marks) can be used in an
action in order to use the event value (e.g. call number that triggers the logic
rule) in the action as parameter.
Example
: The event “Incoming phone call from number” will be fulfilled by
any incoming SIP call. In the field
URL
of the action “HTTP GET”, the com-
mand “http://example.org/log/%EVENTVALUE%” is entered. At an incoming
SIP call (e.g. 6002), this logic rule will be triggered and the call number of the
incoming SIP call will be sent via the HTTP GET command to “http://
example.org/log/6002”.
Stop if rule matches
Activate this checkbox to make sure that the respective logic rule must be trig-
gered until the following logic rules can be carried out.
1.5
1.4
