Commend Duetto EE 980 Product Manual Download Page 45

Page: 45 / 172

Control Station Duetto

WebConfig configuration

1.7/1217

WebConfig “SIP“



Local port

: In this field, the port on which the SIP User Agent listens can be changed.

→

By default: 5060



Serverless transport protocol

: In this drop-down list, UDP or TCP can be selected for serverless

SIP operation.



Auto-Answer

: Activate this checkbox in order to accept an incoming SIP call automatically at the

DUETTO device (no manual call accepting required).



Use SIP INFO for DTMF dialling

: Activate this checkbox to send DTMF through SIP INFO messag-

es according to RFC 6086 (formerly RFC 2976) instead of through the RTP payload according to RFC

4733 (formerly RFC 2833).



Show domain/address information on incoming calls

: Activate this checkbox to show the

IP address or domain of the calling SIP station on the display of the DUETTO device

(e.g. “[email protected]”).

Audio Codecs



The priority for codec negotiation can be defined by drag and drop. The priority of the audio codecs

is listed in descending order. When initiating a SIP call, the DUETTO device requests to establish the

conversation using the audio codec with the highest priority. If the other subscriber is able to inter-
pret this audio codec, the conversation is established with this audio codec. Otherwise, the DUETTO

device suggests the audio codec with the next lower priority. These steps will be repeated until an

audio codec is selected that can be used by both subscribers.



Deactivate the checkbox of an audio codec in order to disable it for SIP conversations.

1.3

1.4

1.4.1

Summary of Contents for Duetto EE 980













































































































































































Search results

Summary of Contents for Duetto EE 980

Reviews:

Related manuals for Duetto EE 980

Brands by name

Popular brands

Commend Duetto EE 980, Product Manual

Search results

Summary of Contents for Duetto EE 980

Reviews:

Related manuals for Duetto EE 980

Brands by name

Popular brands