Setup guide
Control Station Duetto
18
1.7/1217
Add video connection of external IP camera
A video stream of an external IP camera can be allocated to the DUETTO device in CCT 800 (in addition
to the built-in HD video camera). This video stream can be shown e.g. permanently on the DUETTO
display via a background element.
Configuration CCT 800
Subscriber > Station Properties > Cameras >
tab
Camera
Right-click and select the Intercom Server to which the external camera shall be assigned via the
entry “Add external camera”.
Camera no
: In this field, enter a unique number for the video stream.
Camera description
: In this field, an up to 14 characters long text can be entered, which will be
(Optional) used in CCT 800.
Subscriber > Station Properties > Cameras >
tab
Addressing
Camera IP Address
: In this field, enter the IP address of the external IP camera.
Camera Port no.
: In this field, enter the desired port number (RTSP = “554”, HTTP = “80”).
(Optional)
Username
and
Password
: In these fields, the data for authentication can be entered (if
required).
Videolink
: In this field, enter the video stream URL with the syntax “rtsp://<video stream URL>” or
“http://<video stream URL>” through which the video stream of the external IP camera can be re-
trieved. See the following example:
Video stream example
Subscriber > General >
tab
Naming
Camera No.
: In this field, enter the camera number entered under
Subscriber > Station Proper-
ties > Cameras >
tab
Camera
for the external video stream.
NOTE: Supported transmission protocols and codecs
DUETTO supports the following transmission protocols and codecs:
Transmission protocol
: HTTP, RTSP
Video codec
: H.264 Constrained Baseline, MPEG-4
Audio codec
: AAC, AC3 32kHz Mono
NOTE: Resolution for proper playback of video stream
In order to ensure a proper playback of the video stream, the resolution of the video file may not exceed
800 x 600 pixel.
ATTENTION: Camera number must not be “0”
The camera number must not be “0”. Otherwise, the video stream is not shown on the DUETTO
display!
NOTE: Further information
For further information about the configuration of external IP cameras via CCT 800, see manual
“
Video WS
”.
