Commend Duetto EE 980 Product Manual Download Page 116

Page: 116 / 172

Program interface

Control Station Duetto

116

1.7/1217

Function menu: Wi-Fi

User interface “Wi-Fi”

In this menu, the DUETTO device can be connected to an available Wi-Fi network (e.g. for data or
speech signal transfer). Carry out the following configuration steps:



Plug in a wireless USB adapter into any USB jack of the DUETTO device. Consider that the respective

USB port has to be activated in the WebConfig (

see page 55

). The driver of the wireless USB adapter

will automatically be installed.



Tap on the desired Wi-Fi network in order to connect the DUETTO device with it.

ATTENTION: Test the Wi-Fi connection



This function depends significantly on the used Wi-Fi USB stick, access point, properties of the

room and the requirements of the signal range! Test this function in detail! For information regard-
ing supported Wi-Fi USB sticks,

see page 12



If an Ethernet and Wi-Fi connection is used at the same time as the DUETTO device, different IP

address ranges must be used!

NOTE: Changes will not be applied in the WebConfig

Changes made in this menu are applied automatically in the Wi-Fi configuration on the DUETTO

device, but not in the WebConfig (

see page 43

1.3

Summary of Contents for Duetto EE 980













































































































































































Search results

Summary of Contents for Duetto EE 980

Reviews:

Related manuals for Duetto EE 980

Brands by name

Popular brands

Commend Duetto EE 980, Product Manual

Search results

Summary of Contents for Duetto EE 980

Reviews:

Related manuals for Duetto EE 980

Brands by name

Popular brands