WebConfig configuration
Control Station Duetto
30
1.7/1217
Configuration: DISPLAY
In this section, the display settings of the DUETTO device can be configured (brightness, dimming).
Configuration WebConfig
CONFIGURATION > DISPLAY
The following dialogue appears:
WebConfig “DISPLAY”
Brightness
Brightness
when active
: In this drop-down list, the brightness of the activated display can be
selected.
Brightness
when dimmed
: In this drop-down list, the brightness of the dimmed display can be
selected.
Brightness
when inactive
: In this drop-down list, the brightness of the inactivate display can be
selected.
Dim
Dim display after
: In this drop-down list, the time after which the display will be dimmed in case
of inactivity can be selected.
Set display inactive after: In this drop-down list, the time after which the display automatically turns
off can be selected. The display will be activated at an incoming call or when the display is tapped
or swiped or the hand is placed near the right bottom of the DUETTO
.
NOTE: Used display brightness/activity
If both settings have the same value, the parameter “set display inactive after” is applied.
When the value of the parameter “dim display after” is higher than “set display inactive after”, the
setting “dim display after” will be used first.
