Control Station Duetto
WebConfig configuration
1.7/1217
49
Login
Dynamic login
: Activate this checkbox for a dynamic login of the subscriber port of DUETTO. The
field
MAC Address
will be activated for a manual entry of the MAC address.
MAC Address
: Select the desired radio button to respectively define the MAC address of DUETTO.
The following functions are available:
Auto
: Use the MAC address of the Ethernet interface of the device.
Manual
: In this field, enter a valid MAC address for the connection to the Intercom Server. In order
to activate this field, activate the checkbox
Dynamic login
(
). If this field is deactivated,
the MAC address will be configured automatically.
Block number
In this field, enter an Intercom Server block number. Using this block number, the DUETTO device
can request the subscriber and camera directory of all Intercom Servers that are allocated to this
Intercom Server block. This is required if e.g. the subscriber information or video of cameras shall
be shown at incoming calls from Intercom Servers that are located in the same Intercom Server
block, but registered at different Intercom Servers than the DUETTO device.
Click on the button
APPLY
to save the settings.
ATTENTION: Use correct MAC address
For a dynamic login the correct MAC address is required!
ATTENTION: Configuration of MAC address
The MAC address will only be used for registration on the Intercom Server as an authentication!
NOTE: MAC address for VirtuoSIS key subscribers
The MAC address of the devices Ethernet interface will be used for authentication as a VirtuoSIS
key subscriber. It is still possible to connect the subscriber via an optional MAC address.
NOTE: Configuration of block numbers
The block number can be configured with the program CCT 800. Further information about block
configuration can be found in the manual “
Intercom Server Configuration
”.
1.4.1
