Control Station Duetto
Setup guide
1.7/1217
15
Version
: Shows the currently installed version of the DUETTO device.
IP
address
: In this field, enter the IP address of the DUETTO device if the function “DHCP” is dis-
abled.
Subnet
mask
: In this field, enter the subnet mask of the DUETTO device if the function “DHCP” is
disabled.
Router-IP
: In this field, enter the router IP address of the DUETTO device if the function “DHCP” is
disabled.
Card-IP
: In this field, enter the IP address of the IP card, to which DUETTO is connected.
Port
: In this field, the destination port number of the IP subscriber card can be changed.
→
By default: 16400
MAC
: Shows the MAC address of DUETTO (can be configured via CCT 800 or WebConfig).
DYN
: Activate this checkbox to enable the dynamic registration.
DHCP
: Activate this checkbox to automatically configure the IP settings via a DHCP server (except
the fields
Card-IP
and
Port
).
(Optional)
Host
name
: In this field, a host name can be entered for the DUETTO device (visible in
the status bar of DUETTO).
VID
: In this field, enter the VLAN ID, which DUETTO shall use inside the network.
Send the configuration to the Intercom Server
The configuration of the IP stations has to be sent to the Intercom Server. It is possible to send either
the configuration of all stations, only of modified stations or of all stations selected in the table to the
Intercom Server.
Configuration IP Station Config
In the drop-down list next to the button
Write Settings
, select one of the following upload options:
all
: The entire configuration will be sent.
modified
: The configuration will be sent only to modified subscribers.
selected
: The configuration will be sent only to the selected subscribers.
Click on the button
Write settings
to send the configuration to the respective IP subscribers.
Export the configuration to the computer
It is possible to save the configuration of the IP Station Config on the connected computer. The
exported configuration file can be saved in several data types.
Configuration IP Station Config
Menu
Station
>
Export
Settings
Select the data type of the exported configuration file in the submenu:
to EXCEL
: Save as XLS file.
to HTML
: Save as HTML file.
to TXT
: Save as TXT file.
NOTE: Update of the device firmware
The device firmware has to be updated in the WebConfig (
).
