Control Station Duetto
Setup guide
1.7/1217
17
Use built-in HD video camera
CCT 800 detects the built-in HD video camera of EE 980CM and SIP-EE 980CM automatically as soon as
the device is registered. In contrast with conventional cameras, nearly all settings of the built-in HD vid-
eo camera are configured automatically. For further information about the registration of an external
camera, see manual “
Video WS
”.
Configuration CCT 800
Subscriber > Station Properties > Cameras >
tab
Camera
Camera no
: In this field, enter a unique number for the built-in HD video camera.
(Optional)
Camera description
: In this field, an up to 14-characters-long text can be entered, which
will be used in CCT 800.
(Optional)
Camera text
: In this field, an up to 14-characters-long camera text can be entered, which
will be displayed on TFT displays / monitors during camera connection.
Subscriber > Station Properties > Cameras >
tab
Addressing
Card IP address
: Shows the IP address of the IP subscriber card to which DUETTO is connected.
Terminal IP Address
: Shows the IP address of DUETTO.
Camera IP Address
: Shows the IP address of the built-in HD video camera (equal to the IP address
of DUETTO).
Camera Port no.
: In this field, the port number can be changed.
→
By default: 7742
(Optional)
Videolink
: In this field, the video stream URL can be changed.
→
By default: 3.mjpg
ATTENTION: Camera number must not be “0”
The camera number must not be “0”. Otherwise, the video stream is not shown on the DUETTO
display!
