Calibration
6-16
Chapter 6: Configuration
98-150471-A02
6. Enter the Modem CW frequency (Continuous Wave) in GHz.
This is provided by the satellite operator, typically when talking to the satellite operator
on the phone before starting the line up.
7. Set the values as advised by the service provider:
• Azimuth
• Elevation
• TX polarisation
8. If needed, add 90 degrees to the TX polarisation by selecting the field.
9. To save the TX polarisation offset value, click the button
Save polarisation offset
.
10.Follow the instructions from the service provider to make a P1dB compression test
(VSAT modem).
11.Click the button
Deactivate
to leave the line up procedure.
When finished, the saved value for TX polarisation is visible the next time the line up
procedure is selected.
Figure 6-12: Web interface: SERVICE, Line up: Antenna ready
SAILOR900HP.book Page 16 Monday, July 18, 2016 12:44 PM
