Supported commands
98-150471-A02
Appendix D: Command line interface
D-5
Command line interf
ac
e
D.2.7
satellite
Command
Description
satellite name
Shows the name of the currently active satellite
profile.
satellite lon
satellite lon 1W
Shows or sets the longitude position of the satellite,
in degrees.
• 1.0W or 1.0E or -1.0 for west and 1.0 for east
satellite skew
satellite skew 3.7
Shows or sets an additional skew offset of the
satellite
a
. Some satellite has additional skew
because they have been placed different in the
orbit. E.g. Optus satellites in Australia are offset -45
degrees. Most satellites have 0 degree skew offset.
• Skew of the satellite: –90° to +90°.
satellite max_inc
satellite max_inc 2.5
Shows or sets the maximum inclination of the used
satellite. Some satellites are old and are therefore
moving in larger circles in space. Setting the
maximum inclination will add this to the SAILOR
VSAT system acquisition window size used to find
the satellite.
• Maximum inclination of satellite 0.0° to 90°
satellite rx_pol
satellite rx_pol v
Shows or sets the current RX polarisation:
• v (vertical)
• h (horizontal)
• l (left)
• r (right)
satellite tx_pol
satellite tx_pol v
Shows or sets the current TX polarisation:
• v (vertical)
• h (horizontal)
• l (left)
• r (right)
satellite ele_cut_off
satellite ele_cut_off 5
Shows or sets the elevation referenced to earth
where the SAILOR VSAT system must shut off for
transmission. This is an FCC requirement. The
elevation cut off depends on how much power is
transmitted and which coding is used.
• Valid range: 0° to 90°
satellite rx_lo
Shows the Rx LO / LNB LO.
Range: 9.6 GHz to 11.3 GHz.
GX: 18.25 GHz
Table D-8: UCLI command:
satellite
SAILOR900HP.book Page 5 Monday, July 18, 2016 12:44 PM
