RF interference
F-10
Appendix F: Grounding and RF protection
98-150471-A02
F.8
RF interference
Interference induced from nearby high-power RF transmitters might cause system failures
and in extreme cases permanent damage to the SAILOR 900 VSAT High Power equipment.
If there are problems with interference from HF transmitters, it is advisable to mount ferrite
clamps on the coax cable in order to provide suppression of induced RF. The ferrites will
have no effect on the differential-mode signals but increases the impedance in relation to
common-mode RFI.
F.8.1
Recommendations
Use 1-5 pcs. hinged clamp cores (e.g. the RFC or SFC series from Kitagawa) mounted on the
ADU cable near the ADU.
SAILOR900HP.book Page 10 Monday, July 18, 2016 12:44 PM
