Keypad and menus of the ACU
6-50
Chapter 6: Configuration
98-150471-A02
Example: EVENT 1/4*
: This is the first event out of a list of 4 and there has been a
change in the list. EVENT 1/4 will always be shown, the * indicates that there
has been a change.
NETWORK menu
Description
PORT 1/2 IP
Current IP address for LAN 1 and LAN 2.
MASK 1/2
Current netmask for LAN 1 and LAN 2.
PORT 3 IP
(LAN 3) Current IP address of the SAILOR 900 VSAT High Power
web interface (default: 192.168.0.1).
MASK 3
(LAN 3) Current netmask of the SAILOR 900 VSAT High Power
web interface (default: 255.255.255.0).
PORT 4 IP
Current IP address for LAN 4.
MASK 4
Current netmask for LAN 4.
DEFAULT GATEWAY
Current default gateway.
Table 6-20: NETWORK menu of the ACU
SATELLITE menu
Description
POSITION
Position of the current satellite.
RX POLARISATION
HORIZONTAL, VERTICAL.
TX POLARIZATION
X-polarisation or Co-polarisation, auto-selected by VSAT modem
RX FREQUENCY
Ku band receiving frequency of the active satellite, auto-selected
by VSAT modem.
LNB LO
Auto selected by VSAT modem.
TX FREQUENCY
Transmission frequency, auto-selected by VSAT modem
BUC LO
12.8 GHz, system parameter
Table 6-21: SATELLITE menu of the ACU
EVENT
menu
Description
<EVENT>
In this menu all active events are listed. Use
and
to go through the
active events.
Events can be of the type WARNING or ERROR. The event time is UTC time.
If a new event occurs or there is a change in the event list while you are in
the
EVENTS
menu, a * is shown in the upper left corner of the display, next
to the menu name. Press
OK
to update the EVENTS list, the * will be
removed.
A
>
means the event text is longer than the display. Press to
>
to see the
remaining text.
Table 6-22: EVENTS menu of the ACU
SAILOR900HP.book Page 50 Monday, July 18, 2016 12:44 PM
