Configuration with the web interface
6-32
Chapter 6: Configuration
98-150471-A02
The default gateway can be set as a static IP address. Then set the default gateway source
to static and enter the IP address of the default gateway. To remove the default gateway
set it to 0.0.0.0.
Alternatively, if your DHCP server is able to provide a default gateway address and you have
selected DHCP client above, then select the same LAN as your default gateway source.
Zeroconf Settings
On LAN ports 1,3 and 4 you can choose to add a zeroconf address in the network
(169.254.0.0).This zeroconf address will be in addition to the existing static or DHCP IP
address. One port at a time can be enabled.
Zeroconf allows devices to connect to a network automatically.
6.3.5
E-mail setup
To be able to send diagnostics and statistics reports using e-mail you must set up a couple
of parameters. Contact your IT department for the specific data.
To configure the e-mail setup, do the following:
1. Go to
SETTINGS > E-mail setup.
2. Enter the data for Outgoing mail server (SMTP), SMTP port number, SMTP
authentication, User name and password. This data is typically provided by your IT
department.
Figure 6-25: Web interface: SETTINGS, E-mail setup (example)
Note
You must set
Outgoing mail server
to an IP address if DNS has not been set up
in
DNS setup
SAILOR900HP.book Page 32 Monday, July 18, 2016 12:44 PM
