OpenAMIP setup for iDirect iNFINITI & Evolution
98-150471-A02
Appendix C: VMU settings
C-7
VMU se
ttin
gs
[FREQ_TRANS]
down_translation = 11300.000000
up_translation = 12800.000000
#!!(SAILOR VSAT, BUC LO)!!
[MOBILE]
gps_input = 2
#!!(2 = GPS via OpenAMIP)!!
gps_validation_active = 1
init_tx_power_offset = -10.000000
#!!(SAILOR VSAT)!!
is_mobile = 1
#!!(1 = Maritime)!!
latlong_acq_interval = 300
latlong_fail_interval = 10
latlong_interval = 300
tx_handshake_enabled = 0
#!!(SAILOR VSAT)!!
[ODU]
lnb_dc_voltage = 18
lnb_tone_enable = 0
music_present = 0
odu_disable_tx_pwm = 0
odu_rx_10_mhz = 0
odu_rx_dc_power = 0
odu_tx_10_mhz = 1
#!!(SAILOR VSAT)!!
odu_tx_dc_power = 0
[SATELLITE]
channelname = E36B - Maritime
hunt_bandwidth = 0.000000
hunt_frequency = 1233.660000
longitude = 35.900000
max_lat = 0.000000
max_skew = 90.000000
min_look_angle = 0.000000
name = E36B
noise_reference_frequency = 0.000000
pol_skew = 0.000000
polarity = V
rx_lcl_osc = 11300.000000
skew_margin = 90.000000
tx_bandwidth = 0.000000
tx_frequency = 1234.560000
#!!(Tx freq. for best performance)!!
tx_lcl_osc = 12800.000000
#!!(SAILOR VSAT, 12.8 GHz BUC LO)!!
tx_polarity = X
[UCP]
max_power_level_in_db = -5.000000
#!!(S900 VSAT P1dB = -5.0 dBm)
#!!(S800 VSAT 6W P1dB = -6.2 dBm)
power_uplink_control_processing = 1
SAILOR900HP.book Page 7 Monday, July 18, 2016 12:44 PM
