IQ PLUS CHARGER (ONBOARD)
Charger Repairs
2008-2011 Domestic Battery Charger Maintenance and Service Manual
Page 9-27
9
Charger Relay Installation
Install in reverse order of removal. Connect wires as shown
(Figure 9-19, Page 9-27)
. Tighten nuts securing
relay to charger base to 18 in-lb (2.0 N·m).
CHARGER AC CIRCUIT BREAKER
See General Warning, Section 1, Page 1-1.
AC Circuit Breaker Removal
1. Disconnect the AC cord and remove the battery charger from the vehicle.
See Onboard Charger
Removal on page 9-31.
See WARNING on page 9-22.
2. Remove the charger cover.
3. Disconnect the two black wires attached to the AC circuit breaker
(Figure 9-19, Page 9-27)
.
4. Remove the nut, on the front face of the charger, that secures the breaker and remove the breaker from
the charger.
AC Circuit Breaker Installation
1. Install in reverse order of removal. Tighten nut firmly.
CHARGER AC CORD AND RETRACTABLE CORD REEL
See General Warning, Section 1, Page 1-1.
Short AC Cord Removal
1. Disconnect the AC cord and remove the battery charger from the vehicle.
See Onboard Charger
Removal on page 9-31.
See WARNING on page 9-22.
2. Remove the charger cover.
Figure 9-19 Charger Relay
BLACK WIRE TO
PRIMARY COIL
GREEN GROUND
WIRE
WHITE WIRE
FROM AC CORD
CHARGER RELAY
AC CIRCUIT
BREAKER
BLUE WIRE TO
RELAY
BLACK WIRE TO
CIRCUIT BREAKER
STRAIN RELIEF
BUSHING
AC CORD
CONTROL BOARD
Summary of Contents for 2008-2011
