POWERDRIVE CHARGER (EXTERNAL)
Charger Repairs
2008-2011 Domestic Battery Charger Maintenance and Service Manual
Page 3-33
3
AC Cord Installation
1. Insert the black, white, and green leads of the new AC cord into the charger through the hole in the
charger face
(Figure 3-27, Page 3-33)
.
2. Connect the black wire to the AC circuit breaker, the white wire to the primary coil, and the green wire
to the charger base. Tighten the screw on the green (ground) wire terminal to 18 in-lb (2.0 N·m).
3. Position the strain relief bushing on the AC cord.
4. Using pliers, install the strain relief bushing and AC cord into the mounting hole in the charger face.
5. Install the charger cover.
Figure 3-27 Charger Relay
GREEN GROUND
WIRE
TAN WIRE TO
PRIMARY COIL
WHITE WIRE
FROM AC CORD
STRAIN RELIEF
BUSHING
AC CORD
CHARGER
RELAY
AC CIRCUIT
BREAKER
BLACK WIRE TO
CIRCUIT BREAKER
BLACK WIRE TO RELAY
VOLTAGE SUPPRESSOR
(RED WIRE) TO
HEATSINK
TAN WIRE TO
PRIMARY COIL
BLUE WIRE TO
DC CORD
Summary of Contents for 2008-2011
