HIGH FREQUENCY CHARGER (ONBOARD)
Onboard Charger Operation
Page 10-6
2008-2011 Domestic Battery Charger Maintenance and Service Manual
10
CHARGER DISPLAYS
10-LED display on charger:
Charger Information Light (Single-LED display mounted on dash of vehicle):
LED Color
Indication
(following
“Power-On
Self Test”)
Ammeter
(Amber)
Solid:
Displays approximate scale of current output
during bulk phase.
Flashing:
High internal charger temperature. Output
reduced. Also displays algorithm #1-6 for 11
seconds if no battery is connected.
80%
Charge
(Amber)
Solid:
Bulk charge phase complete, 80% charged. In
Absorption phase.
Flashing:
With no battery connected, indicates algorithm #
selected by number of flashes.
100%
Charge
(Green)
Solid:
Charging complete. Charger in Maintenance
Mode.
Flashing:
Absorption phase complete. In Finish phase
AC On
(Amber)
Solid:
AC Power good
Flashing:
Low AC Voltage. Check voltage and power cord
length (see above for guidelines).
Fault (Red)
Flashing:
Charger error. Reset charger power and refer to
Troubleshooting Instructions below.
LED
Color
Indication
(following “Power-
On Self Test” in
which each light
will flash once in
order from red, to
green and amber)
Green
Solid:
Charging complete. Charger in Maintenance Mode.
Flashing:
Short:
<80% Charge.
Long:
>80% Charge.
Amber
Flashing:
Reduced Power Mode: Low AC Voltage or High internal
charger temperature.
Red
Flashing:
Charger error. Reset charger power and refer to
Troubleshooting Instructions below.
Summary of Contents for 2008-2011
