POWERDRIVE 3 – MODEL 26580
Charger Repairs
2008-2011 Domestic Battery Charger Maintenance and Service Manual
Page 7-31
7
AMMETER
See General Warning, Section 1, Page 1-1. See additional WARNING on page 7-1.
Ammeter Removal
1. Disconnect AC cord from the wall outlet and DC plug from the vehicle receptacle.
2. Remove the charger cover.
3. Disconnect the DC cord red wire (1) and the white wires (2 and 3) from the ammeter (4)
(Figure 7-24,
Page 7-31)
.
4. Press the locking tabs on each side of the ammeter and remove the ammeter by gently pushing the
ammeter through the front of the charger case.
Ammeter Installation
1. Place the ammeter (4) in position in the charger face and ensure that the locking tabs are secure
(Figure 7-24, Page 7-31)
.
2. Connect the DC cord red wire (1) and the white wires (2 and 3) to the ammeter terminals.
3. Install the charger cover.
4. Plug the charger into the vehicle and check ammeter for proper operation.
Figure 7-24 Ammeter
1
2
4
3
Summary of Contents for 2008-2011
