Clover CDR-0850 Instruction Manual Download

Page: 37 / 162

6. How to Operate

6-4.3. APPEARANCE OR DISAPPEARANCE OF POWER BUTTON

The Power On/Off button and the Audio buttons (See 6-7.4) as shown in Fig.6-3-1 will always

stay on the MENU bar when the system is not connected through the

SmViewer

(Client Host

Program or Internet Explorer). But the Power On/Off button and the Audio buttons on the

MENU bar as shown in Fig.6-3-1 will be disappeared on the screen of the DVR and the

client’s computer when the system is connected through the

SmViewer

and the mouse

pointer is on the

SmViewer

(See 6-3-2).

We designed this function so that users can not turn the power On/Off or control the audio

functions on the DVR system through internet.

[Fig.6-3-1 Power & Audio buttons]

[Fig.6-3-2 No Power & Audio buttons ]

To appear the buttons (See Fig.6-3-1) on the MENU bar: just move the Mouse-

pointer on the screen of the DVR system only, not on the SmViewer.

Summary of Contents for CDR-0850


































































































































































Search results

Summary of Contents for CDR-0850

Reviews:

Related manuals for CDR-0850

Brands by name

Popular brands

Clover CDR-0850, Instruction Manual

Search results

Summary of Contents for CDR-0850

Reviews:

Related manuals for CDR-0850

Brands by name

Popular brands