Clover CDR-0850 Page 120 Instruction Manual Download

Page: 120 / 162

Stand-alone DVR

Instruction Manual

7-7.4. MAC ID

▫

MAC ID is connecting address for Ethernet, every unit has 12 digit address (HEX 6 byte).

MAC ID was already assigned with the factory default value. User can not change it.

7-7.5. MNS (MAC NAME SERVER)

As a sort of DDNS, two servers in our company (CLOVER) are being operated so that our

client can access DVR with a Dynamic IP address. If one of servers stops to operate, the

other one will automatically start to work.

▫

Click the

MNS

button in the NETWORK menu with a mouse (buttons on the front panel or

remote controller) and then the

MNS

window will show up as below (See Fig.7-101).

▫

To return to the

NETWORK

window, click the

(EXIT) button in the

MNS

menu.

[Fig.7-101 MNS window]

▫

DISABLE / ENABLE

You can select the

DISABLE

ENABLE

button on both SERVER 1 and SERVER 2 by

clicking the mouse or pressing the

ENTER

button on the front panel or remote controller.

“

DISABLE

”: MSN (MAC NAME SERVER) is not working.

“

ENABLE

”: MSN (MAC NAME SERVER) is working.

[Fig.7-102 DISABLE/ENABLE button]

120

Summary of Contents for CDR-0850


































































































































































Search results

Summary of Contents for CDR-0850

Reviews:

Related manuals for CDR-0850

Brands by name

Popular brands

Clover CDR-0850, Instruction Manual

Search results

Summary of Contents for CDR-0850

Reviews:

Related manuals for CDR-0850

Brands by name

Popular brands